Brush Hour Mobile Dog Grooming

Grooming at Home

How to Brush Your Dog Between Grooming Appointments

By Brush Hour Mobile Dog Grooming·Updated ·7 min read

Freshly groomed Cavapoo with an even, brushed-out curly coat standing on the grooming table inside the Brush Hour van
The short version
  • Brush a few times a week for most dogs and daily for long, silky or curly coats, according to the AKC and VCA veterinarians.
  • The goal is to reach the skin, not to smooth the top. Use line brushing: part the coat, brush below the part, move up, repeat.
  • Finish with a metal comb. If it glides from skin to tip, that section is done. If it catches, go back with the brush.
  • Brush before a bath, never after only. Water tightens tangles.
  • A knot tight against the skin is a job for a groomer, not for scissors.
In this guide

    Knowing how to brush your dog between grooming appointments is the difference between a quick, comfortable groom and a coat that has to be clipped short. Most owners do brush. The problem is that a brush skimming the top of the coat leaves the hair near the skin untouched, and that is exactly where tangles start. This guide covers the right tools for each coat type, the line brushing technique groomers use to reach the skin, and a simple weekly rhythm that fits a busy Bay Area schedule.

    How often should you brush your dog?

    For most dogs, a few short sessions a week. Long, silky, curly and Doodle-type coats need daily brushing, or close to it, because they hold on to shed hair instead of dropping it. Short, smooth coats can get by with once a week. Heavy shedders need more during shedding season.

    The American Kennel Club says most dogs only need a few brushing sessions a week, though long-coated breeds often do best with daily brushing. VCA veterinarians are more specific about the high-maintenance group: dogs with long, silky or curly coats require daily brushing to keep the hair from tangling or matting. The ASPCA agrees that smooth, short coats need only about one brushing a week.

    Coat typeExamplesBrushHow often
    Short and smoothLabrador, Boxer, Dachshund (smooth)Bristle brush or rubber curryAbout once a week
    Double coatGolden Retriever, Shepherd, Husky, SheltieSlicker brush, undercoat rake in sheds, metal combAt least weekly, more while shedding
    Long and silkyShih Tzu, Maltese, YorkiePin or slicker brush, metal combDaily
    Curly and Doodle-typePoodle, Goldendoodle, Cavapoo, BichonSlicker brush, metal combDaily or every other day

    What tools do you actually need?

    Two tools cover most dogs: a slicker brush to work through the coat and a metal comb to check that you reached the skin. Add a bristle brush or rubber curry for smooth coats and an undercoat rake for heavy shedders. Skip the soft brush that only polishes the surface of a thick coat.

    • Slicker brush. Fine wire pins that reach under the top layer. The AKC suggests a soft slicker for puppies and a medium one for adult dogs. Use a light hand; pressing hard scratches the skin.
    • Metal comb. Your quality check. A comb with wide teeth on one end and narrow on the other handles both the body and the face.
    • Bristle brush or rubber curry. For short coats. The AKC recommends brushing against the direction of growth to loosen dead hair, then with it to remove the hair.
    • Undercoat rake or shedding tool. For double coats during heavy sheds. The AKC advises pulling it with the direction of growth and not pressing hard on tools with blades.
    Shih Tzu on the grooming table inside the Brush Hour van with brushes, combs and scissors hanging on the wall
    Inside our van: a Shih Tzu on the table, with the brushes, combs and scissors on the wall behind.

    How do you brush down to the skin?

    With line brushing. Instead of brushing over the coat, you part it into a horizontal line, brush the hair below the line from the skin outward, then move the part up a finger’s width and repeat. Layer by layer, every hair gets brushed at the root, which is where tangles actually start.

    The AKC tells owners to work all the way down to the skin using gentle strokes, and to check regularly for mats, burrs and plant material. Line brushing is how groomers do that in a thick coat. Here is the method, step by step:

    1. Start at the bottom of a leg or the lower side. Hold the coat up with your free hand so you can see a line of skin.
    2. Brush the hair below the line, starting at the skin and pulling out to the tips, in short, light strokes.
    3. Drop a little hair down from your hand to make the next line, about a finger’s width higher, and brush that layer.
    4. Keep going up the section, then move to the next one: legs, sides, chest, back, tail, then the head and ears last.
    5. Comb each section when you finish. If the comb glides from skin to tip, move on. If it catches, brush that spot again.

    When you hit a small knot, hold the hair between the knot and the skin with your fingers so the brush pulls against your hand, not the dog’s skin. Work from the tip of the knot toward the base in small strokes.

    Where do mats start first?

    Where the coat rubs or stays damp: behind the ears, under the collar or harness, in the armpits, on the belly, between the back legs and on the tail. The AKC notes that mats commonly develop behind the ears and under the legs. Check these spots every session, even on days you skip the rest.

    A Bay Area detail: in the rainy months, harness straps and damp bellies make these spots tangle faster. Dry the dog well after a wet walk and brush once the coat is dry. Our guide to hot spots after rainy walks covers why damp coats are worth the extra few minutes.

    Should you brush before or after a bath?

    Before, and again after the coat is fully dry. Water tightens tangles, so a small knot that you could have brushed out turns into a felted mat once the coat is washed and dried. VCA veterinarians warn that tangles can become impossible to remove after a bath.

    The same goes for swimming and beach days. Rinse, dry thoroughly, then brush. Brushing a soaking wet curly coat tends to stretch and break the hair rather than separate it.

    How do you make brushing something your dog accepts?

    Keep it short, frequent and rewarding. A few calm minutes most days works better than one long session before a grooming appointment. Pick a quiet moment, like after a walk, pair the brush with small treats, and stop before your dog gets restless.

    VCA veterinarians, including a board-certified veterinary behaviorist, give the same advice for nail trims: keep sessions to a minute or two, a few days a week, and pair each touch with something the dog enjoys. It works just as well for brushing. Watch for signs your dog has had enough, such as moving or leaning away, yawning, ears folded back or a tucked tail, and end on a good note.

    When should you stop and call a groomer?

    When the comb will not pass through a spot after gentle brushing, when the coat feels like felt or a solid pad against the skin, or when brushing clearly hurts. Those are mats, and pulling on them is painful. Never cut them out with scissors; the skin sits right inside the mat.

    Moderate mats can usually be worked out by a groomer, and mats tight to the skin are kinder to clip. At Brush Hour, dematting is a $35 add-on to any bath or groom, and our dematting page explains how we decide with you. Booking on a steady schedule makes all of this rarer: our guide to how often to groom your dog gives intervals by coat type, and the full at-home grooming routine covers baths, nails, ears and teeth.

    Frequently asked questions

    How often should I brush my dog between grooms?

    It depends on the coat. The AKC says most dogs do well with a few brushing sessions a week, while long-coated breeds often do best with daily brushing. VCA veterinarians say long, silky or curly coats need daily brushing to keep them from tangling or matting.

    What is line brushing?

    Line brushing is a way to reach the skin in a thick or curly coat. You part the hair in a straight line, brush the hair below the line down to the skin, then move the part up a little and repeat, layer by layer, until the whole section is done.

    Which brush should I use on my dog?

    Most medium, long and curly coats need a slicker brush plus a metal comb to check the work. Short, smooth coats do well with a bristle brush or a rubber curry. Double-coated dogs benefit from an undercoat rake during heavy shedding.

    Should I brush my dog before or after a bath?

    Before. VCA veterinarians note that tangles can become impossible to remove after a bath, because water tightens them. Brush and comb the coat out first, then bathe, then brush again once the coat is completely dry.

    What if I find a mat I cannot brush out?

    Stop and leave it for your groomer. Do not cut it out with scissors, because the skin is pulled up inside the mat and is easy to cut. A groomer can work out moderate mats or clip tight ones safely.

    Sources: American Kennel Club, “Dog Grooming at Home: Brushing, Bathing, and Nail Care” (updated September 2, 2026), “How to Groom a Double-Coated Dog” (updated November 19, 2024) and “When Brushing Your Shedding Dog, Use the Right Tool”; VCA Animal Hospitals, “Grooming and Coat Care for Your Dog” (updated January 30, 2026) and “Taking the Stress out of Nail Trimming for Dogs” (updated September 12, 2025); ASPCA, “Dog Grooming Tips”. This guide is general information. If brushing uncovers sores, redness or lumps, see your veterinarian.

    Related: Dematting at your door · Double-coated dog grooming · Dog grooming at home